It’s suffering that many of us have experienced: You have accidentally drop your phone in water, and now you’re frantically trying to figure out how to get water out of charging port. Maybe it was a puddle, the sink, or even the toilet. In your mad rush to retrieve it, you notice that the charging port is thoroughly soaked with water. This situation can cause significant anxiety, but it is important to remain calm.
While water damage can cause serious problems, several proven methods can help minimize damage and save your device. This article will equip you with practical knowledge and effective strategies to deal with this common problem. Over the following sections, we will delve into why water is so harmful to your charging port, preventive measures to avoid such situations, and seven tried-and-tested methods to remove water from your charging port safely and effectively. Quick action and smart decisions are the keys to saving your device. Let’s dive in.
Why is water dangerous for your charging port?
At first glimpse, it may not be obvious why a few drops of water in your charging port can cause such a ruckus. We need to know about electric circuits to understand this issue. Charging ports are complex pieces of technology, many small components that work together to strengthen your device. Water is a leading insulator, which means it can take the current electric current.
When water enters your charging port, it can create a non-intended way for electricity, which causes a short circuit. Short circuits can cause a sudden increase of electricity that your device is not designed to handle, which is likely to damage the port, battery, and even the entire motherboard of your device.
In addition, water can also cause corrosion over time. As water is dry, it can stay behind impurities and minerals that can slowly spoil sensitive electronic ingredients. If not immediately paid attention, it can be more permanent and irreparable damage. In the next section, we’ll explore how you can prevent water damage before it happens.
7 Proven Methods about How to Get Water Out of Your Charging Port?
If you’ve ever accidentally dropped your phone in water, you know the sinking feeling that comes along with it. But even if you’re careful, water can still find its way into your phone’s charging port. Whether it’s from rain, sweat, or just a spilled drink, water in your charging port can cause all sorts of problems.
The good news is that there are a few effective ways to get water out of your charging port. Here are seven of the best methods:
Method 1: Use a dryer and Vacuum Cleaner
A vacuum cleaner can be an effective way to suck water out of your charging port. This method should be used carefully to avoid any static electricity that could damage your device. When using a vacuum cleaner, make sure that you set it to the lowest setting possible. Just put the vacuum cleaner’s nozzle up to the port and turn it on.
The vacuum will suck up any water that’s inside. After using the vacuum, leave your device to dry naturally for a while. This method can be particularly effective if your charging port contains a certain amount of water.
However, it’s always a good idea to follow up with one of the drying methods we discussed earlier, such as silica gel packets or gentle heat, to ensure that all moisture is thoroughly removed from the device. Remember, patience is the key here. It may be attractive to turn on your device to test if it’s working, but doing so could potentially cause a short circuit if there’s still moisture.
Method 2: How to Get Water Out of Charging Port Using a Can of Compressed Air
Compressed air can be an effective way to remove water from your charging port. But before we go into the details of “How to get water out of the charging port”? We know that there are small components inside the port that we do not want to harm by mistake. So now, on the Method.
Using air pressure, you will be able to push water out of the port. Compressed air cans are commonly used for cleaning electronic devices and can be purchased from most electronics stores. Hold the Compressed air a few inches from the port and spray in short bursts. Avoid long sprays as they can introduce too much force or potentially chill and damage the port. After spraying in the charging port, give your device some time to dry naturally.
Compressed air can also be used to remove water from other areas of your device, like the speakers or microphone.This method can be quite effective for removing water, but if it doesn’t work, don’t despair. There are still other methods to try.
Method 3: How to Get Water Out of Charging Port Using a Vacuum Cleaner
You may not think of using a vacuum cleaner to get water out of your charging port, but it is actually a very effective method. Just make sure that you use a vacuum cleaner with a small attachment so that you don’t damage the port.
1. Turn off your device and remove the charging port cover.
2. Insert the vacuum cleaner attachment into the charging port.
3. Turn on the vacuum cleaner and let it run for a few seconds.
4. Turn off the vacuum cleaner and remove the attachment.
5. Use a cotton swab to remove any residual water.
This method is effective because the vacuum cleaner will remove all of the water from the charging port. However, you need to be careful not to damage the port with the vacuum cleaner attachment.
Method 4: How to Get Water Out of Charging Port Using a Cotton Swab
If your charging port is full of water, a cotton swab can help remove it. First, remove any visible water from the port. Then, take a cotton swab and soak up any remaining water. Finally, use a hairdryer on the low setting to dry out the charging port.
Method 5: How to Get Water Out of Charging Port by Applying Heat
Applying mild heat can help to evaporate the water from your charging port. This method requires careful attention to avoid overheating your device, which can cause additional damage. One way to apply heat is to use a hairdryer. Using the lowest heat setting, keep it far enough away from your device that it doesn’t burn.
The goal is to encourage the water to evaporate without introducing too much heat. You can also place your device in a warm (not hot) location, such as near a window that gets a lot of light. As with the other methods, give your device plenty of time to dry out naturally after applying heat. You’ll need to be patient; trying to rush the process can end up causing more harm than good.
Method 6: How to Get Water Out of Charging Port with Rice?
The rice method is probably the most famous DIY method to dry electronic devices. Rice is a good water absorbent, and it can remove moisture from your device over time. This procedure does not require special equipment: you just need a bowl of rice. First, bury your device in rice, and make sure the charging port is fully covered.
Leave it there for at least 24-48 hours to allow rice to absorb moisture. Although this method is popular, it is worth noting that it is not always the most effective. Small particles of rice can sometimes enter the charging port and can cause further problems. Also, silica gel packets may not be effective in absorbing rice moisture. Despite these drawbacks, the rice method is an easily accessible option that can be tried in a pinch.
Method 7:How to Get Water Out of Charging Port using a Towel?
How to get water out of charging port using a towel. Here are three practical and proven methods for drying out a charging port using a towel:
1. Use a dry, absorbent towel.
This is the most important step! You’ll want to use a dry and absorbent towel, such as a microfiber towel. Avoid using a paper towel or anything else that might leave lint or other debris behind.
2. Gently wipe the towel around the port.
Don’t scrub too hard; you don’t want to damage the port. Just gently wipe the towel around the port to soak up any water.
3. Repeat as necessary.
If the port is still wet, repeat steps 1-3 until it is dry.
Hopefully, these tips will help you dry out your charging port and get your phone working again!
How To Get Water Out Of Your Charging Port On iPhone 11, 12, 13, 14 Using Silica Gel?
Water damage to the charging port of the iPhone 11, 12, 13, or 14 is common, as the company claims that these variants are water resistant. This can happen when the phone is dropped into water or when it is left in a humid environment. If this happens, it is necessary to know how to get water out of the charging port so that the phone can continue to be used.
One way to get water from the charging port is by using silica gel. Silica gel is a substance that is often used to absorb moisture. It is often found in packets that are included with new electronics. These packets can be placed in the charging port and left for a few hours. The silica gel absorbs the moisture from the charging port and can then be removed.
So many commercial products are designed to get water out of the charging port. These products can be found at most electronics stores. If none of the above work, you will need to take the phone to a professional who can take it apart and get the water out of the charge port.
Conclusion
In conclusion, successfully removing water from a charging port is an easy process that can be completed with basic household items. All it takes is some cotton swabs, rubbing alcohol, and a vacuum cleaner to get the job done. To prevent water damage in the future, remember to always keep all electronic devices away from water and moisture. Follow these methods if you ever run into a wet charging port problem, and when you recover your device, it’ll look as good as new.